Launching Gentoo VMs on okeanos.io
October 23, 2012
Long time, no post.
Since ~okeanos is mainly aimed towards the Greek academic community (and thus has restrictions on who can use the service), we set up a ‘playground’ ‘bleeding-edge’ installation (okeanos.io) of Synnefo, where anyone can get a free trial account, experiment with the the Web UI, and have fun scripting with the kamaki API client. So, you get to try the latest features of Synnefo, while we get valuable feedback. Sounds like a fair deal. 🙂
Unfortunately, being the only one in our team that actually uses Gentoo Linux, up until recently Gentoo VMs were not available. So, a couple of days ago I decided it was about time to get a serious distro running on ~okeanos (the load of our servers had been ridiculously low after all :P). For future reference, and in case anyone wants to upload their own image on okeanos.io or ~okeanos, I’ll briefly describe the steps I followed.
1) Launch a Debian-base (who needs a GUI?) VM on okeanos.io
Everything from here on is done inside our Debian-base VM.
2) Use fallocate or dd seek= to create an (empty) file large enough to hold our image (5GB)
fallocate -o $((5 * 1024 * 1024 *1024)) -l 1 gentoo.img
3) Losetup the image, partition and mount it
losetup -f gentoo.img
parted /dev/loop0 mklabel msdos
parted /dev/loop0 mkpart primary ext4 2048s 5G
kpartx -a /dev/loop0
losetup /dev/loop1 /dev/mapper/loop0p1 (trick needed for grub2 installation later on)
mount /dev/loop1 /mnt/gentoo -t ext4 -o noatime
4) Chroot and install Gentoo in /mnt/gentoo. Just follow the handbook. At a minimum you’ll need to extract the base system and portage, and set up some basic configs, like networking. It’s up to you how much you want to customize the image. For the Linux Kernel, I just copied directly the Debian /boot/[vmlinuz|initrd|System.map] and /lib/modules/ of the VM (and it worked! :)).
5) Install sys-boot/grub-2.00 (I had some *minor* issues with grub-0.97 :P).
6) Install grub2 in /dev/loop0 (this should help). Make sure your device.map inside the Gentoo chroot looks like this:
and make sure you have a sane grub.cfg (I’d suggest replacing all references to UUIDs in grub.cfg and /etc/fstab to /dev/vda).
Now, outside the chroot, run:
grub-install --root-directory=/mnt --grub-mkdevicemap=/mnt/boot/grub/device.map /dev/loop0
Cleanup everything (umount, losetup -d, kpartx -d etc), and we’re ready to upload the image, with snf-image-creator.
snf-image-creator takes a diskdump as input, launches a helper VM, cleans up the diskdump / image (cleanup of sensitive data etc), and optionally uploads and registers our image with ~okeanos.
0) Since snf-image-creator will use qemu/kvm to spawn a helper VM, and we’re inside a VM, let’s make sure that nested virtualization (OSDI ’10 Best Paper award btw :)) works.
First, we need to make sure that kvm_[amd|intel] is modprobe’d on the host machine / hypervisor with the nested = 1 parameter, and that the vcpu, that qemu/kvm creates, thinks that it has ‘virtual’ virtualization extensions (that’s actually our responsibility, and it’s enabled on the okeanos.io servers).
Inside our Debian VM, let’s verify that everything is ok.
grep [vmx | svm] /proc/cpuinfo
modprobe -v kvm kvm_intel
1) Clone snf-image-creator repo
git clone https://code.grnet.gr/git/snf-image-creator
2) Install snf-image-creator using setuptools (./setup.py install) and optionally virtualenv. You’ll need to install (pip install / aptitude install etc) setuptools, (python-)libguestfs and python-dialog manually. setuptools will take care of the rest of the deps.
3) Use snf-image-creator to prepare and upload / register the image:
snf-image-creator -u gentoo.diskdump -r "Gentoo Linux" -a [okeanos.io username] -t [okeanos.io user token] gentoo.img -o gentoo.img --force
If everything goes as planned, after snf-image-creator terminates, you should be able to see your newly uploaded image in https://pithos.okeanos.io, inside the Images container. You should also be able to choose your image to create a new VM (either via the Web UI, or using the kamaki client).
And, let’s install kamaki to spawn some Gentoo VMs:
git clone https://code.grnet.gr/git/kamaki
and install it using setuptools (just like snf-image-creator). Alternatively, you could use our Debian repo (you can find the GPG key here).
Modify .kamakirc to match your credentials:
enable = on
url = https://astakos.okeanos.io
cyclades_extensions = on
enable = on
url = https://cyclades.okeanos.io/api/v1.1
colors = on
token = [token]
enable = on
url = https://cyclades.okeanos.io/plankton
account = [username]
container = pithos
enable = on
pithos_extensions = on
url = https://pithos.okeanos.io/v1
Now, let’s create our first Gentoo VM:
kamaki server create LarryTheCow 37 `kamaki image list | grep Gentoo | cut -f -d ' '` --personality /root/.ssh/authorized_keys
That’s all for now. Hopefully, I’ll return soon with another more detailed post on scripting with kamaki (vkoukis has a nice script using kamaki python lib to create from scratch a small MPI cluster on ~okeanos :)).